Empty

Total: 0.00 AUD
  • Facebook
  • Twitter
Ph: (02) 9543-9299

750GPH BOAT BILGE PUMP + FLOAT SWITCH COMBO NEW Submersible Marine Water 750 GPH

750GPH BOAT BILGE PUMP + FLOAT SWITCH COMBO NEW Submersible Marine Water 750 GPH
$ 43.90 AUD

750GPH Boat Bilge Pump

& Automatic Float Switch

 photo 750GPHBILGEPUMPANDFLOATSWITCHMRBOATS500_zps069c95f3.gif

12 Volt Fully Submersible

This is a high quality boat bilge pump and automatic float switch. Perfect for boats from 8ft up to 30ft. It's compact so it can fit into small spaces.The float switch turns on when the water level exceeds 2 inches (51mm) then automatically turns off when the level drops below 3/4inch (19mm).

This switch doesn't use any mercury so its safe to use around people and friendly for the enviroment as well.

 Its easy to install. Comes with tinned wire tails for more resistance against salt water & corrosion.

750GPH Pump Description:

  • 12-Volt Compact, fully submersible electric pump
  • Extremely efficient, very low current draw and high capacity output
  • Easy to clean snap lock strainers
  • Water cooled long-life motor
  • Ignition protection
  • Water tight seals
  • Stainless steel shaft
  • Rustproof and corrosion resistant  
  • Silent and vibrationless operation 
  • Anti-airlock protection
  • Comes with a easy to read user manual, installation instructions & wiring diagram
  • 1 Year warranty

 

Specifications:

  • Voltage: 12V DC
  • Flow capacity: 750 Gallons per hour - 38 Litres per minute
  • Max. delivery head: 4 metres (height of vertical water flow up pipe)
  • Current draw: Only 2.5 Amp 
  • Hose Outlet: Suits 20mm (3/4") dia hose  
  • Approvals: CE
  • Twin core wire: 750mm long

 

Dimensions:

Height: 105mm

Width: 60mm (Base)

Outlet: 20mm, 3/4" (Outside)

 photo 750GPHBILGEPUMPDIMENSIONSMRBOATS500_zps104f5949.jpg

____________________________________________________

Easy to remove from base to clean the strainer

____________________________________________________

BOX

____________________________________________________

Automatic Float Switch Description:

  • Suitable for 12V-32V bilge pumps, with a maximum of 30 Amps
  • Automatically turns your bilge pump on when the water level is over 2 inches (51mm)
  • Automatically turns pump off when water level drops below 3/4 inches (19mm)
  • Tough thermoplastic body
  • Heavy-duty nylon housing
  • Mercury Free (Very Safe) 
  • Submersible and Ignition protected
  • Sillent Vibration Free Operation
  • Comes with a easy to read user manual, installation instructions & wiring diagram 
  • CE certifications
  • 1 Year warranty

 

Specifications:

  • Voltage: 12 - 32V DC
  • Current draw: 30 Amp max 
  • Approvals: CE
  • Twin core wire: 750mm long

 

Dimensions:

Height: 60mm

Width: 140mm (Base)

____________________________________________________

Packaging Front and back

____________________________________________________

If your after a higher volume pump or bilge pump hoses to help install this pump please check our other listings. As we keep a complete range of boating products to help you out.

1 X 750GPH Bilge pump

  • Automatic Float Switch
  • Instructions

 

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
1 + 3 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.