3.1m / 11FT ISLAND INFLATABLE RIB (HYAPLON) Aluminium Rigid Base, Australian Designed, Quality Build, Thermo Welded Seams

SKU: TRO310 Category:



The Island (TROPICS) TRO310 is made from hard wearing durable Hypalon material, specifically made for hotter tropical regions like far north Queensland. The TRO310 has much more room. Allows up to a 15hp outboard so the boat boat plane for higher speeds. TRO310 is a perfect tender for small to larger cruisers / yachts. The rigid base is a double skin flat Aluminium Floor. Keeping it light weight but more durable then a fibreglass base. White / Grey features will fit in while floating next to your pride and joy.

Island Inflatable boats are Australian designed using the latest “High Frequency Thermo Welding” (HFTW) Technics on all seams for durability against Australia’s harsh conditions. You’ll never have a Island Inflatable seam come apart due to heat or hot days due to HFTW.

It’s not only our manufacturing processes which makes Island Inflatables the #1 selling privately owned brand in Australia. It’s our unique features and attention to detail. Firstly all our boats are designed by “Island Inflatables”. Most brands you see online and in-store are boats purchased at trade fairs with brand names then placed on them.

Lets start with our materials. Island Inflatables use the heaviest grade of HYPALON material possible before going into the commercial grades used in the armed forces etc. Our grade is 1100 Denier / 0.9mm thickness.

All tubes sizes are oversized. This makes for a nicer riding boat. It’s more comfortable to be sitting on the side of a inflatable with larger tubes. It also creates a much drier ride.

A good way to see if a inflatable boat is a quality inflatable boat is by the tow rings located at the front of the boat. Island Inflatable boats use a large heavy duty Stainless Steel tow ring. Mounted on a equally large and reinforced mounting patch. Lesser quality boats will always use a smaller ring and patch with no reinforcing.

Island Inflatable Boats pay special attention to wear and tear. We use non-marking rubbing / wear strips around the side and under the keel.

All Island Inflatables come standard with a over-inflation valve. Fitted to help with hotter days and increased air pressure.

On the underside of each oversized tube we apply a 2nd layer of HYPALON material. This helps when dragging or launching your inflatable off a beach. It gives that extra layer of protection from any hidden rocks / shells etc.

Island Inflatables off set the grab / safety rope to the side of the tube instead of the top. This is so when sitting on the tubes your not sitting on a uncomfortable rope.

Whats stands out most with the Island inflatable boats is the unique and very useful Internal Rear Carry Handles. This was our first design feature we come up with. As having the handles on the outside rear tubes makes it impossible for 1 people to carry the boat. Also the handles are made from a much harder material which can easily scratch your cruiser / yacht. So it made perfect sense to move the handles from the outside of the rear tubes to the inside.



  • Weight: 57kg
  • Length: 3.1m
  • Width: 160cm
  • Large Tube Dia: 42cm for a dryer more comfortable ride
  • Person capacity: 3
  • MAX Outboard: 15hp / 11kw
  • MAX cargo load: 600kg
  • Inflatable Chambers: 3


Tube AIR Pressures of inflation:

  1. Outside Tubes: 3.6 PSI


Standard Equipment:

  • Dual Action Hand Pump.
  • Carry Bag
  • Set of Oars
  • Repair kit


Package Includes:

  • SL310 Island Inflatable Boat
  • Dual Action Hand Pump
  • Pair of Oars
  • Repair Kit


Overall length
3.1m / 11ft
Inside length
Overall width
Inside width
Tube diameter
Person capacity
4 Persons
Cargo capacity
Max motor power
15hp / 11kw
Boat weight (Boat/Floor/Oars)
RIB Floor
Aluminium Rigid Base
Share on facebook
Share on twitter